Arizona Ash River Platter
June 6, 2022As I was processing bowl blanks from the Arizona Ash I cut 1.5 to 2 inches of the pith out. I then cut those slabs to remove the pith and set them aside to dry. I decided to take two of these halves and make…
Woodturnings, Freehand Router Carved Signs and other Woodworking Projects
Category: Woodworking
Did Someone Say Corncob Pen – Here’s Two
March 28, 2022A viewer recently commented that if I made another corncob pen, she’d buy it. So I made two her to choose from. These corncobs were stabilized with Cactus Juice (link in description below) back when I made the corncob bowl. One pen is a Sierra…
Small Scale 3D Sign Replica – Freehand Router Carving and Scroll Sawing
March 9, 2021Since I am still unable to get out into the shop this is edited and republished from 2018. I was very happy with the end result, but the video has barely gotten any views. Unfortunately it is not a turning, but it is something that…
Barndoor Cabinet/Kitchen Island Build Part 4 – The top and completion
November 24, 2020This time I mill and glue up the top and actually get the island finished. It took longer than I thought it would because of equipment issues, but I got through it. We decided to go with the original plan and put it on casters.…
Barndoor Cabinet/Kitchen Island Build Part 3 – The Drawers
November 15, 2020This time I finally get the drawers milled, built and installed. This section was the most challenging so far. I’ve always built my own wooden drawer slildes and they are relatively easy. But we wanted full extension drawer slides on these to make it easier…
DIY Barndoor Cabinet/Kitchen Island – Part 2
October 31, 2020In this part I get the doors and end panels milled, glued up and installed. It’s slow going because I’m picky, but it is coming along. If you have questions that I didn’t answer, feel free to contact me. Thanks for watching.
Building a Barndoor Cabinet/Kitchen Island – Part 1
October 23, 2020My wife asked me to build this not long after we moved into the new place. Well, that’s been a little over a year now… Recently she said, I really want you to have that done by Thanksgiving. So what do you do? You get…
DIY Christmas Lawn Ornament – My spin on the log reindeer
October 12, 2020My wife told me she needed me to make her one of these, so… well, you know. I have plenty of liveoak firewood stacked up so off to the wood pile I went. Found some suitable pieces of oak and made this deer. I had…
Did someone say Miniature acoustic guitar
June 8, 2020Another re-edit since I’m not quite healed yet. This was a commisioned piece. I had never done anything like this before, but it was a fun challenge. Thank you for your continued support! If have questions that I didn’t answer, feel free to contact me.…
Freehand Router Carved Gate Sign – And a few others
March 24, 2020I needed some signs to direct the traffic of those delivering things to the house. They are constantly leaving my packages in places other than my front door. So I made these to help them out. Not my finest work, but they will do. Thanks…
